×
 
 

NB10.8 Floorplan

10 Series (Under 2,000 lb)
 
The RP10.8 is an open toy hauler trailer with no slideouts. It is an open trailer, so there is a rear ramp, but no doors or walls. Exterior features include rear ramp door, 270 degree wrap-around awning, outside kitchen, and tent on roof rack. Front of the open trailer has two storage boxes. Dimensions of the cargo area: 87.5 inch overall width; 63 inches wide between wheel wells; 37 inches wide between front storage boxes; 194 inch overall length; 124 inch length from cargo gate to front cage; 164 inch length from gate to front storage boxes; 68 inch vertical clearance to front cage.
Enlarge

Specifications

Hitch Weight:
TBD
UVW
TBD
CCC
TBD
Exterior Length:
TBD
Exterior Height:
TBD
Exterior Width:
TBD
Fresh Water:
TBD
Gray Water:
TBD
Black Water:
TBD
Awning Size:
270° Wrap Around
 
GVWR (Gross Vehicle Weight Rating)
– is the maximum permissible weight of the unit when fully loaded. It includes all weights, inclusive of all fluids, cargo, optional equipment and accessories. For safety and product performance do NOT exceed the GVWR.

GAWR (Gross Axle Weight Rating) – is the maximum permissible weight, including cargo, fluids, optional equipment and accessories that can be safely supported by a combination of all axles.

UVW (Unloaded Vehicle Weight)*- is the typical weight of the unit as manufactured at the factory. It includes all weight at the unit’s axle(s) and tongue or pin and LP Gas. The UVW does not include cargo, fresh potable water, additional optional equipment or dealer installed accessories.
*Estimated Average based on standard build optional equipment.

CCC (Cargo Carrying Capacity)** - is the amount of weight available for fresh potable water, cargo, additional optional equipment and accessories. CCC is equal to GVWR minus UVW. Available CCC should accommodate fresh potable water (8.3 lbs per gallon). Before filling the fresh water tank, empty the black and gray tanks to provide for more cargo capacity.
**Estimated Average based on standard build optional equipment.

Each Forest River RV is weighed at the manufacturing facility prior to shipping. A label identifying the unloaded vehicle weight of the actual unit and the cargo carrying capacity is applied to every Forest River RV prior to leaving our facilities.

The load capacity of your unit is designated by weight, not by volume, so you cannot necessarily use all available space when loading your unit.